Eliminator-lighting LED Array Bedienungsanleitung PDF herunterladen

LED Array

SPECIFICATIONS:

Model: LED Array

Supply Voltage: 100 - 240V 50Hz/60Hz

LED: 2 x 9W 3-in1 RGB LEDs

Weight: 5 lbs./2.3kgs

Size: 11.75”L x 8.75”W x 6”H

Fuse: 1 Amp

Power Consumption: 30W

Working Position: Any Safe position

Duty Cycle: None

Colors: Multiple Colored Lenses

Warranty: 1 Year

CAUTION! Please read and understand these

instructions before installing or operating this

unit.

Operating Instructions:

The LED Array is a powerful effect for clubs and dj’s. The LED Array creates a dramatic cluster of

multi-dichroic colored beams. This unit features an external microphone that allows the beams to

be triggered by sound. The LED Array’s beams bounce up and down to the beat of the music. The

LED Array is ready to be hung or set on the ground in a safe position. When mounting this unit to

truss be sure to use a clamp. Plug the unit in to a standard wall outlet. After plugging the unit in, the

fixture will react to the beat of the music via the sound active external microphone. The unit has a

sensitivity knob on the rear of the unit that makes more or less sensitive to sound. Turning the knob

in clockwise direction will make the unit more sensitive to sound. The unit requires sound to activate

the movement.

©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com

Caution! Never open unit when in use.

Always disconnect main power before

replacing the fuse. Remember to always

replace with the exact same type of fuse.

1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

LED Array SPECIFICATIONS: Model: LED ArraySupply Voltage: 100 - 240V 50Hz/60HzLED: 2 x 9W 3-in1 RGB LEDs Weight: 5 lbs./2.3kgsSize:

Keine Kommentare

Eliminator-lighting LED Array Bedienungsanleitung