©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com
E 103
understand these instructions
before installing or operating
thumb screws from the front of the unit.
Gently pull the front lens assembly forward
to access the lamp. Remove and replace
the bad lamp and reassemble in reverse
This fixture is fitted with halogen
lamps which are highly susceptible
to damage if improperly handled.
Never touch lamp with bare fingers
as the oil from your hands will short-
en lamp life. Also, never move fixture
until lamp has had ample time to
cool. Remember, lamps are not cov-
ered under warranty conditions.
Never open unit when in use.
Always disconnect main power before
serving or replacing lamp. Remember to
always replace with the exact same type
The unit is ready to be hung
This fixture is designed to oper-
ate as a stand alone unit. It has been tested and the
lamp has been installed at the factory there is no
The E103 has three different
operating modes. For best results, we suggest using
fog or special effects smoke when using this unit.
This will enhance the effect allowing you to see the
This unit comes with a 3-way
three (3) different operating modes; Static, Sound
Active, and Continuous Rotation. When the switch
the internal dichroic dish spin
via its internal microphone. When the unit is in the
the internal dichroic dish is static (does
When the switch is in the "II" position the unit's
Kommentare zu diesen Handbüchern